Applying Architectural Tactics

The use of architectural tactics, as proposed by the Software Engineering Institute, provides a systematic way of dealing with a systems non-functional requirements (sometime referred to as the systems quality attributes or just qualities). These can be both runtime qualities such as performance, availability and security as well as non-runtime such as maintainability, portability and so on. In my experience, dealing with both functional and non-functional requirements, as well as capturing them using a suitable modeling tool is something that is not always handled very methodically. Here’s an approach that tries to enforce some architectural rigour using the Unified Modeling Language (UML) and any UML compliant modeling tool.

Architecturally, systems can be decomposed from an enterprise or system-wide view (i.e. meaning people, processes, data and IT systems), to an IT system view to a component view and finally to a sub-component view as shown going clock-wise in Figure 1. These diagrams show how an example hotel management system (something I’ve used before to illustrate some architectural principles) might eventually be decomposed into components and sub-components.

Figure 1: System Decomposition

This decomposition typically happens by considering what functionality needs to be associated with each of the system elements at different levels of decomposition. So, as shown in Figure 1 above, first we associate ‘large-grained’ functionality (e.g. we need a hotel system) at the system level and gradually break this down to finer and finer grained levels until we have attributed all functionality across all components (e.g. we need a user interface component that handles the customer management aspects of the system).

Crucially from the point of view of deployment of components we need to have decomposed the system to at least that of the sub-component level in Figure 1 so that we have a clear idea of each of the types of component (i.e. do they handle user input or manage data etc) and know how they collaborate with each other in satisfying use cases. There are a number of patterns which can be adopted for doing this. For example the model-view-controller pattern as shown in Figure 2 is a way of ascribing functionality to components in a standard way using rules for how these components collaborate. This pattern has been used for the sub-component view of Figure 1.

Figure 2: Model-View-Controller Pattern

So far we have shown how to decompose a system based on functional requirements and thinking about which components will realise those requirements. What about non-functional requirements though? Table 1 shows how non-functional requirements can be decomposed and assigned to architectural elements as they are identified. Initially non-functional requirements are stated at the whole system level but as we decompose into finer-grained architectural elements (AKA components) we can begin to think about how those elements support particular non-functional requirements also. In this way non-functional requirements get decomposed and associated with each level of system functionality. Non-functional requirements would ideally be assigned as attributes to each relevant component (preferably inside our chosen UML modelling tool) so they do not get lost or forgotten.

Table 1
System Element Non-Functional Requirement
Hotel System (i.e. including all actors and IT systems). The hotel system must allow customers to check-in 24 hours a day, 365 days a year. Note this is typically the accuracy non-functional requirements are stated at initially. Further analysis is usually needed to provide measurable values.
Hotel Management System (i.e. the hotel IT system). The hotel management system must allow the front-desk clerk to check-in a customer 24 hours a day, 365 days a year with a 99.99% availability value.
Customer Manager (i.e. a system element within the hotel’s IT system). The customer manager system element (component) must allow customer details to be created, read or updated (but not deleted) 24 hours a day, 365 days a year with a 99.99% availability value.
Customer Manager Interface (i.e. the user interface that belongs to the Customer Manager system element). The customer manager interface must allow customer details to be created, read or updated (but not deleted) 24 hours a day, 365 days a year with a 99.99% availability value.

Once it is understood what non-functional requirement each component needs to support we can apply the approach of architectural tactics proposed by the Software Engineering Institute (SEI) to determine how to handle those non-functional requirements.

An architectural tactic represents “codified knowledge” on how to satisfy non-functional requirements by applying one or more patterns or reasoning frameworks (for example queuing or scheduling theory) to the architecture. Tactics show how (the parameters of) a non-functional requirement (e.g. the required response time or availability) can be addressed through architectural decisions to achieve the desired capability.

In the example we are focusing on in Table 1 we need some tactics that allow the desired quality attribute of 99.99% availability (which corresponds to a downtime of 52 min, 34 sec per year) to be achieved by the customer manager interface. A detailed set of availability tactics can be found here but for the purposes of this example availability tactics can be categorized according to whether they address fault detection, recovery, or prevention. Here are some potential tactics for these:

  • Employing good software engineering practices for fault prevention such as code inspections, usability testing and so on to the design and implementation of the interface.
  • Deploying components on highly-available platforms which employ fault detection and recovery approaches such as system monitoring, active failover etc.
  • Developing a backup and recovery approach that allows the platform running the user interface to be replaced within the target availability times.

As this example shows, not all non-functional requirements can be realised suitably by a component alone; sometimes full-realisation can only be done when that component is placed (deployed) onto a suitable computer platform. Once we know what non-functional requirements need to be realised by what components we can then think about how to package these components together to be deployed onto the appropriate computer platform which supports those non-functional requirements (for example on a platform that will support 99.99% availability and so on). Figure 3 shows how this deployment can be modelled in UML adopting the Hot Standby Load Balancer pattern.

Figure 3: Deployment View

Here we have taken one component, the ‘Customer Manager’, and showed how it would be deployed with other components (a ‘Room Manager’ and a ‘Reservation Manager’’) that support the same non-functional requirements onto two application server nodes. A third UML element, an artefact, packages together like components via a UML «manifest» relationship. It is the artefact that actually gets placed onto the nodes. An artefact is a standard UML element that “embodies or manifests a number of model elements. The artefact owns the manifestations, each representing the utilization of a packageable element”.

So far all of this has been done at a logical level; that is there is no mention of technology. However moving from a logical level to a physical (technology dependent level) is a relatively simple step. The packaging notion of an artefact can equally be used for packaging physical components, for example in this case the three components shown in Figure 3 above could Enterprise Java components or .NET components.

This is a simple example to illustrate three main points:

  1. Architecting a system based on functional and non-functional requirements.
  2. Use of a standard notation (i.e. UML) and modelling tool.
  3. Adoption of tactics and patterns to show how a systems qualities can be achieved.

None of it rocket science but something you don’t see done much.


2 thoughts on “Applying Architectural Tactics

Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s